Roof Anchor Certification & OSHA 1910.27 Compliance

When it comes to  fall protection testing and certification, Peak Fall Protection has the experience and expertise to perform OSHA and ANSI-mandated inspections to keep your fall protection system compliant.

According to OSHA 1910.27, anchorages that support window washing rope descent systems should be tested and certified by a qualified person at intervals not to exceed 10 years. Peak Fall Protection can provide onsite testing and certification of existing roof anchors and davit bases as well as annual inspection service, also required by OSHA 1910.27. For more specific information related to OSHA certification requirements, refer to our white paper link here.

The ANSI Z359 Fall Protection Code specifies certification of fall arrest anchorage systems at intervals not to exceed 5 years and inspections by a qualified person on an annual basis. Re-certification provides documented assurance by a qualified engineer that the system provides adequate fall protection for current work procedures as required by the latest standards and regulations.

Peak Fall Protection follows all industry safety standards, properly performing and documenting all inspections to assure current and future users that fall protection equipment is in compliance with applicable safety standards. The licensed professionals at Peak Fall Protection are extremely knowledgeable of the guidelines, procedures and documentation required for the re-certification of various fall protection systems.

Certification of Window Washing & Fall Protection Anchor Systems

The engineers and safety professionals at Peak Fall Protection have the necessary experience and knowledge to perform all the required testing to assure your fall protection systems are secure and in working order.

Peak Fall Protection offers inspection and certification of the fall protection systems to include:

• Fall Protection Anchors
• Davit Systems
• Horizontal Lifelines
• Guardrail Systems
• Monorail Systems
• And More!

Contact Peak Fall Protection For the Highest Standards in Safety

Peak Fall Protection provides fall protection equipment inspection and re-certification services to maintain continuous ANSI and OSHA compliance with the latest fall protection regulations. Our team can also review, test, and certify existing systems where documented certification does not exist. Contact Peak Fall Protection in Apex for a no-obligation quote for any of our inspection and certification services.